What primer should I use for Jiangyu metallic paint?

What primer should I use for Jiangyu metallic paint?

In the field of model making and painting, Jiangyu metallic paint is favored by enthusiasts for its excellent metallic texture and ease of use. However, to achieve the best painting results, it is crucial to choose the right priming method. This article will combine the hot topics and hot content on the Internet in the past 10 days to provide you with a detailed analysis of Jiangyu's metallic paint primer plan and provide structured data for reference.

1. Characteristics of Jiangyu metallic paint

Jiangyu metallic paint is a water-based metallic paint with fine particles, uniform color development, and strong adhesion. Its metallic effect is close to the texture of electroplating, and it is widely used in painting scenes such as Gundam, car models, and military models. However, if the base is not applied properly, problems such as uneven hair color and poor adhesion may easily occur.

2. Comparison of base plans

According to recent discussions on model forums and social platforms, the following is a comparison of commonly used primer schemes for Jiangyu metallic paint:

3. Recent hot topics of discussion

1.Mirror effect primer: Recently, many model communities have been hotly discussing the combination of "gloss black + craftsman metal paint". By first spraying high-gloss black primer and then thinly applying metallic paint, a mirror effect close to electroplating can be obtained.

2.Water/Oil Based Primer Compatibility: Some users have reported that oil-based primer may affect the adhesion of Jiangyu water-based metallic paint. It is recommended to use the same series of products or to dry them thoroughly.

3.special effects processing: The latest discussion mentioned that adding a small amount of pearlescent powder to the primer can create a unique metallic gradient effect.

4. Detailed explanation of operating steps

1.surface treatment: Use 1000-1200 grit sandpaper to polish the surface to remove defects such as parting lines.

2.Primer selection: Select the appropriate primer based on the final effect, refer to the table above.

3.Spraying Tips: Keep a distance of 15-20cm, spray multiple layers in thin layers, and leave each layer 10 minutes apart.

4.Drying time: It takes 24 hours for the primer to dry completely. Rushing to apply color will affect the effect.

5. Frequently Asked Questions

6. Expert advice

According to what professional painters shared at a recent model show, when using Takumi Metallic Paint:

1. For complex curved surfaces, it is recommended to first spray water and soil to check the surface.

2. To pursue the ultimate mirror effect, try the three-step method of "black primer → polish → metallic paint"

3. When painting a large area, keep the ambient humidity at 40-60% to obtain the best results.

7. Summary

The choice of primer for the craftsman metallic paint directly affects the final presentation effect. By analyzing recent popular discussions and practical cases, we found that specialized primers are still the best choice in most cases, while special effects require targeted solutions. It is recommended to do a sample test before painting, record the primer parameters each time, and gradually accumulate experience. We hope that the structured data and practical suggestions in this article can provide valuable reference for your model painting.